Buildworld: 0116 212 3456
Crown Trade Matt Vinyl Emulsion Paint Brilliant White
BW-26017 small Image 1
Crown Trade Paints Logo

Crown Trade Matt Vinyl Emulsion Paint Brilliant White

SKU: BW-26017 MFC: 5024070

Variations & Sizes

  1. Step 1
  2. Select Litre
OP-7865 - 2.5L

Product Description

Crown Trade Matt Vinyl Emulsion Paint Brilliant White - Various Litres Available

  • A premium quality flat matt emulsion
  • Suitable for interior use on wall and ceiling surfaces, where a flat non-reflective finish is required.
  • Drying Time Under normal drying conditions : touch dry in 1-2 hours and recoatable after 4 hours.
  • Allow for adequate ventilation during the drying period
  • Finish Matt.
  • Spreading Rate 17m² per litre on smooth surfaces.
  • Wet Film Thickness : 59 micrometres at 17m² per litre
  • Dry Film Thickness : 17 micrometres at 17m² per litre.
  • Volume Solids : 28.6% Brilliant White other colours will vary

Specification

  • Size
  • 2.5 Litre, 5 Litre
  • Colour
  • Brilliant White
  • White
  • Finish
  • Matt
  • Application Methods
  • Airless Spray, Brush, HVLP Spray, Roller
  • Coverage
  • Up to 17sq/m per litre
  • VOC level
  • Low
  • Thinning
  • Water
  • Touch dry
  • 1-4 hours
  • Recoatable
  • 4 hours
  • Scrubbability
  • Wipeable
  • Cleanup
  • Water & Detergent
  • Base
  • Water

+ Delivery & Returns

Crown Trade Matt Vinyl Emulsion Paint Brilliant White

£17.79Each
Crown Trade Matt Vinyl Emulsion Paint Brilliant White
  • Composition :
  • Pigment - Titanium Dioxide, coloured pigments and extenders.
  • Binder - Vinyl acetate copolymer.
  • Solvent - Water.
  • Limitations :
  • For interior use only.
  • Do not apply when air or substrate temperatures are likely to fall below 8 degree C or when the relative humidity is above 80% during application or the drying period.
  • PREPARATION :
  • New Surfaces -
  • All surfaces must be sound, clean, suitably dry and free from anything that will interfere with the adhesion of the materials to be applied.
  • Powdery surfaces should be primed with one coat of Sandtex Trade Water Based Stabilising Solution.
  • Polished or dense surfaces should be primed with Crown Trade Alkali Resisting Sealer or where a waterbased alternative is required Crown Trade Grip Extreme.
  • Porous surfaces should be coated with a ‘mist’ coat of Crown Trade Matt Vinyl diluted with 40% clean water by volume. Where clean water is not available, apply one coat of Crown Trade Covermatt Drywall Primer.
  • Any areas of surface filling after priming should be touched in with the priming or mist coat diluted as for main areas.
  • Previously Decorated Surfaces -
  • All surfaces must be sound, clean, suitably dry and free from anything that will interfere with the adhesion of the materials to be applied e.g. dirt, grease etc.
  • Remove all loose, failing or suspect paint.
  • Feather edges of sound paint.
  • Organic growth must be removed and the areas treated with Crown Trade Fungicidal Solution.
  • Fill any fixing holes, cracks and shallow surface defects with Sandtex Trade Ready Mixed Filler.
  • Patch prime bare, filled and powdery areas as for new surfaces above.
  • Wash remaining sound paint with hot water and liquid detergent solution to remove any contaminants, frequently changing the water.
  • Any glossy or eggshell surfaces should be wet abraded to provide a key.
  • Rinse with clean water to remove all residues.
  • Allow to dry. If after cleaning any areas are still contaminated with substances likely to cause staining and / or bleeding, patch prime with one coat of Crown Trade PSB Stain Block Primer.
  • COATING SYSTEM :
  • Apply two coats as required.
  • Certain colours may require additional coats to give complete obliteration.
  • APPLICATION :
  • Stir well before use.
  • Apply by brush or medium roller.
  • For airless spray (dilution may be required).
  • CLEANING :
  • Return surplus material to container.
  • Wash with clean water immediately after use.

Frequently Bought Together:

You May Also Be Interested In:

Reviews & Ratings

Rate This Products:


Submit Your Review

Please enter your name
Please enter your city
Please enter your review title
Please enter your review
How Many Stars Would You Give for the Following?
Quality:  
Rate the product on quality
Value For Money:  
Rate the product on value for money
Style:  
Rate the product on style

Ask A Technical Question

Please enter your name
Please enter your valid email address
Please enter your question

Thank you for answer feedback

We will soon verify the details and add your feedback appropriately.

Thank You For Your Rating

We will soon verify the details and add your rating appropriately.

Delivery & Returns

Thank you for answer feedback

Sorry for the inconvenience. Please try again at a later time.