Sales:   0116 212 3456
Ultra TileFix ProRapid PB Rapid Set Tile Adhesive Grey 20Kg
BW-27160 small Image 1
Ultra Tile Fix Logo

Ultra TileFix ProRapid PB Rapid Set Tile Adhesive Grey 20Kg


Variations & Sizes

  1. Step 1
  2. Select Quantity
OP-10848 - Single Bag

Product Description

Ultra TileFix ProRapid PB Rapid Set Tile Adhesive Grey is well-suited for wall and floor projects, both interior and exterior. This is a high quality adhesive that helps you get the job done sooner. This adhesive is a rapid setting, cementitious wall and floor adhesive with extended workability. It has increased bond strength and can take light foot traffic within 3 hours of installation, depending upon temperature and substrate. It comes with a Lifetime guarantee.

  • It is a rapid setting, cementitious wall and floor adhesive with extended workability.
  • Ideal for both interior and exterior applications.
  • It has increased bond strength and enhanced performance due to polymer modification.
  • It is able to take light foot traffic within 3 hours of installation depending upon temperature and substrate.
  • Ideal for use with ceramic, mosaic and natural stone tiles
  • Fast setting
  • Lifetime guarantee


  • Product Type
  • Rapid Set Tile Adhesive
  • Ideal for
  • Use with ceramic, mosaic and natural stone tiles
  • Suitable tiles
  • Ceramic, Mosaics, Marble, Travertine, Granite, Limestone, Terracotta, Quarry, Slate
  • Suitable Surfaces & Substrates
  • Concrete, Sand/cement screed, Firm and stable plaster, Plasterboard, Sand/cement render, Concrete brick/block
  • Unit Size
  • 20kg Bags
  • Colours
  • Grey
  • Classification
  • EN12004 Class C1FT
  • Bed Thickness
  • 3mm – 12mm
  • Grout After
  • 3 hours
  • Coverage
  • 4.5kg / m² at 3mm Bed Thickness
  • Pot Life
  • 60 Minutes at 20 degree C
  • Set Time
  • 2 Hours at 20 degree C
  • Application Temperatures
  • 5 degree C to 25 degree C
  • Storage
  • Must be stored in unopened bags, clear of the ground in dry conditions
  • Shelf Life
  • 12 months

+ Delivery & Returns

Ultra TileFix ProRapid PB Rapid Set Tile Adhesive Grey 20Kg

Ultra TileFix ProRapid PB Rapid Set Tile Adhesive Grey 20Kg
  • All wall and floor substrates must be clean, dry, firm and stable, free of dust, dirt, oil and grease. Substrates should be strong enough to support the weight of the adhesive and tiles being fixed (see below for loadings).
  • For plasterboard and plaster finishes that have been painted and are showing a weak or flaky surface finish then mechanical sanders or hand sanding blocks are generally used to remove the film. However for the likes of floor screed surface contamination, adhesive residues and weak surface laitance or even smooth dense floors such as power floated concrete, these will require a more heavy duty scarifying using specialist flooring equipment to remove the surface of the substrate to ensure the substrate is sound, stable and has a rough open texture. To encourage best adhesion to the substrate it is advisable that prior to applying adhesive that substrates are primed (please see priming section below).
  • Remember - sanding or mechanical abrasion of any surface will leave powder deposits which require thorough removal by suitable vacuum equipment to provide a clean dust free surface. Failing to remove fine powder deposits and weak surfaces is a common reason for de-bonding of tile adhesive and primer from the substrate. Using a wet sponge to clean down a wall or floor of dust deposits only serves to spread it around, it is therefore advisable to vacuum thoroughly prior to use of wet sponge.
  • Render: When tiling to new render it must be ensured that the render is a minimum of 4 weeks old and is thoroughly strong, dry, dust and efflorescence free and stable
  • Specifically developed to be used as a primer for use with cementitious tile adhesives to provide improved sealing and bonding properties for a variety of substrates.
  • Porous Substrates (includes: plaster, skimmed plasterboard, plasterboard, sand/cement, calcium sulphate screeds, cement backer boards, render and other open textured substrates): Prime with 2 coats of UltraTileFix ProPrimer. The first coat should be diluted 1 part primer to 3 parts clean water (by volume) and allowed to dry for a minimum period of 1 hour. When dry, apply a second coat diluted 1:1 (by volume) and leave for 1 hour to dry before continuing the tiling process.
  • MIXING :
  • Once the substrate has been prepared, continue with the tiling installation. Should be added slowly to clean water in a suitable clean mixing tub and mixed thoroughly using a drill/mixer and paddle to give a slump free, easily worked mortar consistency. Once mixed the mortar is immediately ready for use and has a pot life of approximately 60 minutes at 20 degree C. Mix only sufficient material to be used within the pot life of the product. Do not remix or rewet/dilute product which has aged and is starting to thicken or set.
  • Apply the adhesive to the required thickness (limits 3mm - 12mm) in areas up to 1m² at a time. For internal walls use a notched trowel to the following notch dimensions to provide solid rib lines:
  • Mosaic tiles: 3mm x 3mm at 6mm centres
  • General wall tiles: 5mm x 5mm at 10mm centres
  • General floor tiles: 8mm x 8mm at 16 mm centres
  • For floors and external applications we advise to use the solid bed method. This involves applying a uniform bed of adhesive to the floor and “buttering” the back of the tile with the same adhesive. When the tiles are bedded with a twisting action, pressing firmly down it ensures 100% contact is made with both the floor and the tile.
  • When fitting tiles leave spaces between each of the tiles to allow for grouting (approx: walls 1mm - 3mm and floors 2mm - 12mm).
  • Before the tile adhesive sets clean off the excess adhesive from the face of the tile and grout joints with a clean damp cloth or sponge
  • Wall types vary considerably but all have the same basic need to be structurally sound, strong, smooth and level. It is essential that the wall to be tiled has sufficient inherent strength to hold the proposed tile and the adhesive being used. The following chart lists maximum national standard loadings for a variety of wall substrates:
  • Gypsum plaster 20kg/m2
  • Skimmed plasterboard (gypsum) 32kg/m2
  • Gypsum fibre boards 40kg/m2
  • Cement tile backer boards 40kg/m2
  • Glass reinforced cement sheets 50kg/m2
  • Key areas of use:
  • General wall installations
  • General floor installations
  • Interior installations
  • Exterior installations
  • Suitable for Tiles:
  • Ceramic
  • Mosaics
  • Marble
  • Travertine
  • Granite
  • Limestone
  • Terracotta
  • Quarry
  • Slate
  • Suitable Surfaces & Substrates:
  • Concrete
  • Sand/cement screed
  • Firm and stable plaster
  • Plasterboard
  • Sand/cement render
  • Concrete brick/block
  • Available Pack Size :
  • Single Bag - UTFPRORAPIDPB20
  • 54-Bags Pallet - UTFPRORAPIDPB20

Frequently Bought Together:

You May Also Be Interested In:

Reviews & Ratings

Rate This Products:

Submit Your Review

Please enter your name
Please enter your city
Please enter your review title
Please enter your review
How Many Stars Would You Give for the Following?
Rate the product on quality
Value For Money:  
Rate the product on value for money
Rate the product on style

Ask A Technical Question

Please enter your name
Please enter your valid email address
Please enter your question

Thank you for answer feedback

We will soon verify the details and add your feedback appropriately.

Thank You For Your Rating

We will soon verify the details and add your rating appropriately.

Delivery & Returns

Thank you for answer feedback

Sorry for the inconvenience. Please try again at a later time.