WRX Spray Paint - 501 Matt White - 400ml.
- A ready to use aerosol, for protective and decorative purposes, based on alkyd, acrylic or synthetic resins
- Formulated with special pigments, solvents and special volatile gases
- Conforming to the characteristics of the chosen assortment
- WRX is ecological as it does not contain lead and Chlorinated fluorohydrocarbon
- Does not harm ozone layer
- It has a high coating and covering power
- It forms an elastic protective decorative film coat with a remarkable strength against mechanical abrasions and chocks.
- Dries quickly, and it is colorfast with permanent matt character
- A very high adherence on the surface and it does not crack by time
- WRX Spray Application :
- Ensure application surface to be painted is clean, and fully freed from grease, dust, loose particles / paint layer, rust and humidity.
- The can is ready to apply.
- Release the security trigger on cover.
- Shake it well
- Push in short blasts to apply with constant finger pressure on its dispersion valve from 25-30 cm distance from surface
- Apply it with an even dispersion rate in double cross consecutive light coats
- WRX Spray Paint Drying Time (20oC
- Touch-free in 5-20 min.
- Full dry in 8-12 hours.
- Resistance to abrasions and chemicals in 24 hours.
- WRX Spray Coverage
- 2,5-3 m2 (single coat) / 400 ml can depending on assortment
- WRX Spray Nozzle
- WRX’s unique spray nozzles deliver a 50-50 paint-gas, first phase spray, every time
- Nano-technology is added for enhancing the molecular bonding between the resin and the pigment
- WRX has developed an advanced nozzle called “MICROMIST”. The channels in the nozzle create a “Whirl” effect
- WRX Spray Ozone Friendly
- WRX contains no harmful colorants, pigments or resins and no ozone-damaging propellants
- Safety Cap
- Childproof patented safety cap
- Net Content
- 400 ml
- Scent
- Typical solvent.
- Gloss
- From 7 to 92 Gloss.
- Density at 20oC
- 0,75 ÷ 0,80 g/ml.
- Pressure at 20oC
- 4,0 ± 0,5 bar
- Pressure at 50oC
- 8,0 ± 0,5 bar
- Viscosity Ford Cup 4
- From 11″ to 12,5″
- Remaining Dry Cylinder
- From 12% to 23,8%
- Thickness 1 hand
- 11 Micron
- Thickness 3 hands
- 32 Micron
- Temperature resistance
- 100-120° C
- Appearance
- Can containing pressurised liquid.
- Grit to grindometro
- From 0 to 2 Micron.
- Flash Point
- < 0oC
- Supply specifications
- 15 bar foil-coated can.
- Storage Instructions :
- 3 years in sealed pot at room temperature
- Highly pressurized container
- Store it at well ventilated place
- Avoid direct exposure to sun light
- Do not expose to naked flame.
