Product Description
Fakro Manual High Pivot White Acrylic Roof Window is designed for use with roof pitches between 39-43 degrees to meet the requirements of the DIN 5034-1 standard. Made using the best quality acrylic, this design marvel has a practical pivot mechanism with an axis of rotation situated above the centre of the window. The double glazing makes the room heat efficient and noise-proof, so you have a comfortable space which also attracts less energy expense. The sash can be rotated through 160° and locked allowing safe and easy cleaning of the outer pane when needed.
- Available in Different Sizes
- The centre pivot window, but its axis of rotation is situated above the centre of the window
- The lower part of the sash fulfils a top hung window function and the upper part of the sash is an additional source of daylight
- The sash when opened in position from 0 to 45 degrees is supported by innovative supporting mechanism
- Enabling the sash to be open in any position within this range
- The window when installed in roofs with pitches 39-43 degrees will satisfy the requirements of DIN 5034-1 standard
- According to which the bottom window edge has to be situated 95cm above the floor level and the top minimum 220cm
- The window is operated by the use of handle located at the bottom of the sash
- The handle is equipped with a two-step micro opening mechanism
- Automatic air inlet V40P
- Sash rotated through 160 degrees is locked by the bolt for cleaning
- Increased resistance to burglary - TopSafe system
- A wide range of accessories Installation range 20-65 degrees.
- Prices - Web Exclusive
- Finish - White Acrylic
- High quality close-grain vacuum - impregnated redwood pine guaranteed to be knot-free
- Finished with white acrylic paint
- V40P automatic air vent to prevent unnecessary heat loss
- Glazing - P2 - Safety Double Glaze
- Single chamber glazing
- Laminated and anti-burglary class P2A according to standard EN 356
- Increased resistance against breakage
- Consists of external toughened pane with easy maintenance layer
- Warm TGI spacer and inner pane has two 3mm thick sheets of glass with 0.76mm layer of PVB plastic membrane between them
- Glazing cavity is filled with inert gas- argon
- On the inner side of the laminated glass it has a low emission coating which reduces penetration of UV rays by up to 99 Percent
- Flashing - EZV-A
- For interlocking tiles up to 45mm profile
- Ideal for fitting windows with profiled roof coverings such as roof tiles and metal sheeting
- Universal flashing which can be applied not only to corrugated coverings and roof coverings with a profile depth of up to 45mm
- Applied to individual windows in the slope of the roof
- Used as flashing for windows used in group for V depths in horizontal, vertical, and block
- Roofs with pitches from 15Deg to 90Deg for depths V
- Depths in the roof construction V - (0cm)
- Flashing - EZJ-A - Recessed Style
- For interlocking tiles up to 45mm profile
- Ideal for fitting windows with profiled roof coverings such as roof tiles and metal sheeting
- Universal flashing which can be applied not only to corrugated coverings and roof coverings with a profile depth of up to 45mm
- Applied to individual windows in the slope of the roof
- Used as flashing for windows used in combinations for depth J in horizontal
- Roofs with pitches from 20Deg to 90Deg for depths J
- Depths in the roof construction J - (–3cm)
- Flashing - ELV
- For non-interlocking slate up to 10mm thick
- ideal for fitting windows within slated roofs coverings up to 10mm thickness
- Applied as standard to individual windows in the slope of the roof
- window units combined for V depth in vertical, horizontal and block groups
- Roofs with pitches from 15Deg to 90Deg for depths V
- Depths in the roof construction V - (0cm)
- Flashing - ELJ - Recessed Style
- For non-interlocking slate up to 10mm thick
- ideal for fitting windows within slated roofs coverings up to 10mm thickness
- Applied as standard to individual windows in the slope of the roof
- window units combined for J depth horizontal only
- Roofs with pitches from 20Deg to 90Deg for depths J
- Depths in the roof construction J - (–3cm)
- Flashing - EPV
- For plain tiles up to 16mm thick
- Ideal for a fit between windows and heavy tiled roof coverings such as plain tiles, shingles
- Applied to roof coverings of up to 24 – 32 mm thickness
- For individual windows in the slope of the roof
- Window units may also be combined in horizontal, vertical and block groups
- Roofs with pitches from 25Deg to 90Deg for depths V
- Depths in the roof construction V - (0cm)
- Flashing - EPJ - Recessed Style
- For plain tiles up to 16mm thick
- Ideal for a fit between windows and heavy tiled roof coverings such as plain tiles, shingles
- Applied to roof coverings of up to 24 – 32 mm thickness
- For individual windows in the slope of the roof
- Window units may also be combined in horizontal, vertical and block groups
- Roofs with pitches from 30Deg to 90Deg for depths V
- Depths in the roof construction J - (-3cm)
- Flashing - EHN-A
- For interlocking tiles up to 90mm profile
- Suitable for the water tight connection of roof windows with roof coverings such as roof tiles and high profile metal sheeting
- Applied to roof coverings with a profile depth of up to 90 mm and is applied to individual windows in the slope of the roof
- Used as module flashing for windows installed in horizontal and vetrtical combinations or block groups
- The flashing is available for one installation depth, allowing installation of windows at a level N (+3)
- Can be used on roofs with pitches between 15Deg and 90Deg
- Flashing - ELV-T Thermo universal
- For non-interlocking slate up to 10mm thick
- ideal for fitting windows within slated roofs coverings up to 10mm thickness
- Applied as standard to individual windows in the slope of the roof
- window units combined for V depth in vertical, horizontal and block groups
- Roofs with pitches from 15Deg to 90Deg for depths V
- Depths in the roof construction V - (0cm)
- Additional thermal insulation
- Flashing - EHV-AT Thermo
- For interlocking tiles up to 90mm profile
- Ideal solution which guarantees tight and warm connection of the window with the roof covering
- Insulation of the window above the level of battens
- Glued flexible insulating material which adheres tightly to the window frame constituting a thermo-insulated frame
- Enhances U value of the window up to 15 Percent
- Used with all types of roof coverings up to 90 mm profile depth
- Applied as standard to individual windows in the slope of the roof The flashing may also be used as module Roofs with pitches from 15Deg to 90Deg for depths V
- Depths in the roof construction V - (0cm)
- Additional insulation
- Flashing - EZA
- Lifts windows out of the roofline by 10 degrees
- Flashing for changing window installation angle
- Flashing is ideal for a flush fit of the window with low pitch roof coverings of 10Deg or more
- Enables the installation angle to be raised by an additional 10Deg
- Used in mansard roofs, in extensions and adaptations of low pitched attics in order to extend space in the attic
- Commonly used to install with single windows in roof slopes
- The flashing is also used in modules for horizontal joining of the windows
- Profiled covering up to 45mm, for use with roof tiles and profiled sheeting
- Used on roofs with pitches between 10Deg and 75Deg
- Flashing - ESA
- Lifts windows out of the roofline by 10 degrees
- Flashing for changing window installation angle
- Flashing is ideal for a flush fit of the window with low pitch roof coverings of 10Deg or more
- Enables the installation angle to be raised by an additional 10Deg
- Used in mansard roofs, in extensions and adaptations of low pitched attics in order to extend space in the attic
- Commonly used to install with single windows in roof slopes
- The flashing is also used in modules for horizontal joining of the windows
- Flat covering with a profile depth of 10 mm, for use with slates and similarly flat roof coverings
- Used on roofs with pitches between 10Deg and 75Deg
- Flashing - EHA
- Lifts windows out of the roofline by 10 degrees
- Flashing for changing window installation angle
- Flashing is ideal for a flush fit of the window with low pitch roof coverings of 10Deg or more
- Enables the installation angle to be raised by an additional 10Deg
- Used in mansard roofs, in extensions and adaptations of low pitched attics in order to extend space in the attic
- Commonly used to install with single windows in roof slopes
- The flashing is also used in modules for horizontal joining of the windows
- Profiled covering up to 90mm, for use with roof tiles, corrugated and deep profiled sheeting
- Used on roofs with pitches between 10Deg and 75Deg
Fakro Manual High Pivot FYW P2 - Safety Double Glaze White Acrylic Roof Window
RRP: £1751.98
Save 50%
£875.99
Thank you for feedback
We will soon verify the details and add your feedback appropriately.
