Name: Fakro Manual Center Pivot FTP Natural Pine Roof Window
Brand: Fakro
SKU: BW-29691
Price: 263.94 GBP
Availability: InStock

Product Description

Fakro Manual Center Pivot FTP Natural Pine Roof Window.

Available in Different Sizes
Traditional centre pivot operation
Well equipped window version with hinges located in the middle of the window height
Turn through 180Deg to clean outer pane within the room
Operating handle in the base of the sash for ease of use
Suitable for retro-fitting of electronic operation
Compatible for pitches from 15-90Deg

+ Delivery & Returns

Fakro Manual Center Pivot FTP Natural Pine Roof Window

£263.94^Each

Add To Cart

Finish Details
Natural Pine
High quality close-grain vacuum - impregnated pine guaranteed to be knot-free
Finished with natural acrylic lacquer
V40P automatic air vent to prevent unnecessary heat loss

U3 - Energy Saving Double Glaze
Single chamber
External pane toughened, warm spacer, inner glass with low emission coating
Space between panes filled with inert gas- argon

P2 - Safety Double Glaze
Single chamber glazing
Laminated and anti-burglary class P2A according to standard EN 356
Increased resistance against breakage
Consists of external toughened pane with easy maintenance layer
Warm TGI spacer and inner pane has two 3mm thick sheets of glass with 0.76mm layer of PVB plastic membrane between them
Glazing cavity is filled with inert gas- argon
On the inner side of the laminated glass it has a low emission coating which reduces penetration of UV rays by up to 99 Percent

R1 - Sound Reducing Glaze
Significantly reduces noise penetration
Constructed from toughened glass on the outside, and specially laminated glass inside
Laminated glass has a layer of soft, sound proofing epoxy resin, and a low emission coating
The glazing cavity is filled with gas, which also reduces noise penetration
Sound-proof glazing is made to an exceptionally high specification Rw = 40dB

P5 - Anti-Burglary Triple Glaze
Double chamber glazing
Laminated and anti-burglary class P2A according to standard EN 356
Offers increased resistance against breakage
The glazing cavity is filled with inert gas- krypton
Warm TGI spacer
On the inner side of the laminated glass it has a low emission coating which reduces penetration of UV rays by up to 99 percent.

Flashing - EZV-A
For interlocking tiles up to 45mm profile.
Ideal for fitting windows with profiled roof coverings such as roof tiles and metal sheeting.
Universal flashing which can be applied not only to corrugated coverings and roof coverings with a profile depth of up to 45mm
Applied to individual windows in the slope of the roof
Used as flashing for windows used in group for V depths in horizontal, vertical, and block
Roofs with pitches from 15Deg to 90Deg for depths V
Depths in the roof construction V - (0cm)

Flashing - EZJ-A Recessed Style
For interlocking tiles up to 45mm profile
Ideal for fitting windows with profiled roof coverings such as roof tiles and metal sheeting.
Universal flashing which can be applied not only to corrugated coverings and roof coverings with a profile depth of up to 45mm
Applied to individual windows in the slope of the roof
Used as flashing for windows used in combinations for depth J in horizontal
Roofs with pitches from 20Deg to 90Deg for depths J
Depths in the roof construction J - (–3cm)

Flashing - ELV
For non-interlocking slate up to 10mm thick.
ideal for fitting windows within slated roofs coverings up to 10mm thickness.
Applied as standard to individual windows in the slope of the roof.
window units combined for V depth in vertical, horizontal and block groups
Roofs with pitches from 15Deg to 90Deg for depths V
Depths in the roof construction V - (0cm)

Flashing - ELJ Recessed Style
For non-interlocking slate up to 10mm thick.
ideal for fitting windows within slated roofs coverings up to 10mm thickness
Applied as standard to individual windows in the slope of the roof
window units combined for J depth horizontal only
Roofs with pitches from 20Deg to 90Deg for depths J
Depths in the roof construction J - (–3cm)

Flashing - EPV
For plain tiles up to 16mm thick.
Ideal for a fit between windows and heavy tiled roof coverings such as plain tiles, shingles.
Applied to roof coverings of up to 24 – 32 mm thickness.
For individual windows in the slope of the roof.
Window units may also be combined in horizontal, vertical and block groups.
Roofs with pitches from 25Deg to 90Deg for depths V
Depths in the roof construction V - (0cm).

Flashing - EPJ Recessed Style
For plain tiles up to 16mm thick.
Ideal for a fit between windows and heavy tiled roof coverings such as plain tiles, shingles.
Applied to roof coverings of up to 24 – 32 mm thickness.
For individual windows in the slope of the roof.
Window units may also be combined in horizontal, vertical and block groups.
Roofs with pitches from 30Deg to 90Deg for depths V
Depths in the roof construction J - (-3cm).

Flashing - EHN-A
For interlocking tiles up to 90mm profile.
Suitable for the water tight connection of roof windows with roof coverings such as roof tiles and high profile metal sheeting
Applied to roof coverings with a profile depth of up to 90 mm and is applied to individual windows in the slope of the roof.
Used as module flashing for windows installed in horizontal and vetrtical combinations or block groups.
The flashing is available for one installation depth, allowing installation of windows at a level N (+3)
Can be used on roofs with pitches between 15Deg and 90Deg

Flashing - ELV-T Thermo universal
For non-interlocking slate up to 10mm thick.
ideal for fitting windows within slated roofs coverings up to 10mm thickness.
Applied as standard to individual windows in the slope of the roof.
window units combined for V depth in vertical, horizontal and block groups
Roofs with pitches from 15Deg to 90Deg for depths V
Depths in the roof construction V - (0cm)
Additional thermal insulation

Flashing - EHV-AT Thermo
For interlocking tiles up to 90mm profile.
Ideal solution which guarantees tight and warm connection of the window with the roof covering
Insulation of the window above the level of battens.
Glued flexible insulating material which adheres tightly to the window frame constituting a thermo-insulated frame
Enhances U value of the window up to 15 Percent
Used with all types of roof coverings up to 90 mm profile depth
Applied as standard to individual windows in the slope of the roof. The flashing may also be used as module Roofs with pitches from 15Deg to 90Deg for depths V
Depths in the roof construction V - (0cm)
Additional insulation

Flashing - EZA
Lifts windows out of the roofline by 10 degrees.
Flashing for changing window installation angle
Flashing is ideal for a flush fit of the window with low pitch roof coverings of 10Deg or more
Enables the installation angle to be raised by an additional 10Deg
Used in mansard roofs, in extensions and adaptations of low pitched attics in order to extend space in the attic.
Commonly used to install with single windows in roof slopes
The flashing is also used in modules for horizontal joining of the windows
Profiled covering up to 45mm, for use with roof tiles and profiled sheeting
Used on roofs with pitches between 10Deg and 75Deg

Flashing - ESA
Lifts windows out of the roofline by 10 degrees.
Flashing for changing window installation angle
Flashing is ideal for a flush fit of the window with low pitch roof coverings of 10Deg or more
Enables the installation angle to be raised by an additional 10Deg
Used in mansard roofs, in extensions and adaptations of low pitched attics in order to extend space in the attic.
Commonly used to install with single windows in roof slopes
The flashing is also used in modules for horizontal joining of the windows
Flat covering with a profile depth of 10 mm, for use with slates and similarly flat roof coverings
Used on roofs with pitches between 10Deg and 75Deg

Flashing - EHA
Lifts windows out of the roofline by 10 degrees.
Flashing for changing window installation angle
Flashing is ideal for a flush fit of the window with low pitch roof coverings of 10Deg or more
Enables the installation angle to be raised by an additional 10Deg
Used in mansard roofs, in extensions and adaptations of low pitched attics in order to extend space in the attic.
Commonly used to install with single windows in roof slopes
The flashing is also used in modules for horizontal joining of the windows
Profiled covering up to 90mm, for use with roof tiles, corrugated and deep profiled sheeting
Used on roofs with pitches between 10Deg and 75Deg

Fakro Manual Center Pivot FTP Natural Pine Roof Window

Variations & Sizes

Product Description

Fakro Manual Center Pivot FTP Natural Pine Roof Window

Hozelock AutoReel With Hose 40 Metres

Hozelock 25 metres 2-in-1 Compact Hose Reel With 25 metres Of Starter Hose

Fakro Manual Top Hung FPP Natural Pine Roof Window

Fakro Z-Wave Electric Conservation Center Pivot FTU White Polyurethane Roof Window

Fakro Manual Center Pivot FTP Natural Pine Roof Window

Keylite Manual Center Pivot WCP White Painted Pine Roof Window

Velux Manual Conservation Centre Pivot GGL Pine Roof Window

Reviews & Ratings

Popular Brands

You May Also Be Interested In

Thank you for answer feedback