Product Description
Warmup Sunstone Cement Uncoated Insulation Boards can significantly reduce the heat-up times to less than 30 minutes compared to over 2 hours without insulation. The insulation boards remove the need for a primer when used with underfloor heating. It significantly lowers utility bills and carbon footprint. The boards are water resistant and made of extruded polystyrene, with a fibreglass mesh embedded on a thin cement polymer mortar. The product reflects heat upwards into the floor tile instead of allowing heat to warm the concrete slabs below and is a great option for solid or stud floors.
- Insulation boards reflects the heat upwards into the floor tile instead of allowing heat to warm the concrete slabs below
- Heat up time (for the heated floor to reach the desired temperature) can be cut from as much as 2.5 hours to just 20 minutes
- The thicker the insulation, the quicker the heat-up time.
- Easy to cut and shape around fixtures with a knife or saw
- Comes in a range of thickness to suit floor and wall applications
- Can be fixed to solid or stud floors
- High thermal insulation, resisting heat loss and increasing the heating system’s efficiency
- Offers sound proofing properties.
- Composition : Extruded polystyrene, each side faced with a nominal 0.5mm thick glassfibre mesh reinforced polymer-modified cement mortar
- Class “0” / “B1” fire rated
- No primer required when used in conjunction with underfloor heating
- European compliant and CE marked.
Specification
- Coverage :
- 7.45 square metres
- Uncoated Board Size:
- L-1245mm x W-600mm
- Uncoated Board Thickness :
- 10mm and 20mm
- Area Covered:
- 10mm 3.74 mtr sq and 20mm 7.45 mtr sq
- Load Bearing:
- 30 tonnes/m2
- R Value :
- 6mm 0.16 10mm 0.28 20mm
+ Delivery & Returns
Warmup Sunstone Cement Uncoated Insulation Boards
£69.64Each
Added to Cart