Product Description
Keep your wood surfaces in top condition with the application of the Cuprinol Wood Preserver. This is a colourless general-purpose preserver for interior or exterior use. The product is solvent-based and ideal in situations where wood needs protection against decay, mould and blue-staining fungi. The low-odour formula works efficiently and also gives off a pleasant fragrance. It protects the wood against weather and rotting and is an ideal basecoat before painting, staining or varnishing jobs.
- Cuprinol Wood Preserver
- Colour : Clear
- It is a colourless general-purpose preserver for interior (occasionally wet or interior wood with risk of condensation) or exterior use.
- It gives deep penetrating protection to sound wood against decay, mould and blue-staining fungi.
- This low odour formula has been specially developed with low aromatic solvents to make it more pleasant and convenient to use.
- Actively prevents rot and decay
- Colourless preserver for both interior and exterior use
- For use as a basecoat before painting, staining or varnishing
- Solvent based
- Prevents rot and decay
- Protects against weather and prevents rot and is safe for both plants and animal when dry.
- Application is by brush with coverage up to 5sq/m per litre.
- Recoatable in 6 hours.
+ Delivery & Returns
- Coverage :
- 1L covers up to 5m² with 2 coats.
- 2.5L covers up to 12.5m² with 2 coats.
- 5L covers up to 25m² with 2 coats.
- Coverage can vary depending on application method and the condition and nature of the surface.
- Apply:
- Before application remove excessive dirt and soiling, large areas of algae, lichen or fungi using an appropriate fungicidal wash or cleaner designed for the job.
- Wood that has been wood-stained, painted or vanished should be stripped back to bare wood and treated as bare wood.
- Do not use this product to treat wood destined for in ground contact use.
- Ensure that timber used in ground contact has been pre-treated especially for such use.
- Apply 2 even coats with a brush.
- Leave the first coat to soak in before applying the second but reapply before the first is fully dry (typically 2-6 hours).
- Leave 16 hours for the second coat to dry before painting, staining or vanishing.
- Do not spray.
- Dry:
- The drying time is 16 hours.
- Drying times can vary depending on the nature of the surface and the weather conditions.
- Clean:
- After use: remove as much product as possible from equipment before cleaning with water.
- Do not use or store in extremes of temperature.
Specification
- Product Type
- Wood Preserver
- Pack Size
- 5 Litre
- Colour
- Clear
- Coverage
- 25m² with 2 coats
- Dry Time
- 16 Hours
- Application Methods
- Brush
- Base
- Solvent-based
Added to Cart
