Product Description
Ventilate a roof both at low and high levels with the Timloc Universal Slate Ventilator. This high quality ventilator is able to be combined with a pipe adaptor kit in order to allow you to connect 100-mm soil vent pipes. Each one can suit slates that measure either 610 mm by 305 mm or 510 mm by 255 mm. The product can be used as a ventilation outlet for soil vent pipes and easily connects to any mechanical extraction points leading out from bathrooms and kitchens. The black colour blends in well with the space around it.
- For use on new build and existing roof applications
- Suits slate sizes of either 610 x 305mm or 510 x 255mm
- For replacement of one normal roof slate to provide a ventilator
- Ventilating a roof space at low level or high level
- Connection to mechanical extraction from kitchen/bathrooms
- Ventilation outlet for soil vent pipe
- Roof pitches over 22.5 degree
- Manufactured from polypropylene
- Colour : Black
- Provides free vent area of 10,000mm2
- Fits to the underside of the slate vent to allow a standard
- 110mm soil vent pipe to be connected, kit includes pipe adaptor, 0.5mtr flexible PVC pipe and fixing tie
+ Delivery & Returns
- Quality and Standard:
- Manufactured to BS EN ISO 9001 and BS EN ISO 14001
- Satisfies all NHBC requirements
- Complies with all relevant Building Regulations
- Meets all relevant British Standards
- Installation Advice :
- When fixed at 1 metre centres and at a minimum of 1 metre up from the eaves, a ventilation property equivalent to a 10mm continuous air gap is achieved
- Use product as supplied for the larger slate option (610mm x 305mm)
- Cut product along guide lines for smaller slate option (510mm x 255mm)
- The ventilator replaces one normal slate
- The two roof slates directly beneath the ventilator must be cut to accommodate the felt penetration sleeve on the rear of the slate vent (cut away the minimum possible to achieve a tight fit using the slate ventilator as a template)
- Cut an X into the felt 200mm x 105mm at the point of the felt penetration sleeve, fold up/outwards the four triangular flaps to form an aperture 200mm x 105mm which will accommodate the sleeve, nail the top flaps over the battens
- Position the vent and nail into the batten through the nail slots provided
- Secure the front of the vent using a copper disc rivet
- Connect pipe adaptor kit to underside of slate vent if required.
Added to Cart
