Name: Cuprinol Garden Shades Woodstain 2.5ltr
Brand: cuprinol
SKU: BW-41639
Price: 27.80 GBP
Availability: InStock

Cuprinol Garden Shades Woodstain 2.5ltr - Various Colours Available.

Cuprinol Garden Shades has been specially developed to colour and protect sheds, fences and other garden wood.
Its special pigments ensure a rich colour and allow the natural texture of the woodgrain to shine through.
It can also be applied on terracotta, brick and stone, to bring beautiful colours to the rest of the garden.
Please note this product is not suitable for use on decking
6 year weather protection on wood
Beautiful matt colour enhances the grain of natural wood
Suitable for wood, terracotta, brick and stone
Application - Brush or Spray
MINIMUM OF 2 COATS REQUIRED. SUBSEQUENT COATS MUST BE APPLIED ON THE SAME DAY NO LONGER THAN 8 HOURS APART. IF NOT POSSIBLE, LIGHTLY SAND DOWN SURFACES BEFORE RECOAT TO ENSURE ADHESION.

Product Type
Paint
Colour
Black Ash, Cool Marble, Country Cream, Dusky Gem, Forget Me Not, Muted Clay, Pebble Trail, Seagrass, Silver Birch, Urban Slate, Wild Thyme, Willow
Pack Size
2.5 Litre
Drying time touch dry
1 hour
Suitable Surface
Wood
Application
Brush, Spray
Coverage
Smooth planed wood -Brush 10-12m2 per litre ,Spray 4-5m2 per litre. Rough sawn wood - Brush 3-5m2 per litre ,Spray 2-3m2 per litre
General No. of Coats
2

£27.80^Each

Coverage Details
1L covers up to:
Smooth planed wood -
Brush: 10-12m²
Spray: 4-5m²
Rough sawn wood -
Brush: 3-5m²
Spray: 2-3m²
Coverage can vary depending on application method and the condition and type of surface.

Preparation:
All surfaces should be clean and dry.
If it has been previously coated, loose, flaking paint should be stripped back to bare wood.
Test a small area first for colour and adhesion.

Colour:
The final colour will vary depending on the surface and number of coats.
If adhesion is inadequate on previous coatings, lightly sand before application.
Make sure wood has been pre treated with appropriate wood preserver to prevent wood and decay.

Apply:
Apply in dry conditions, above 5 degrees Celsius and when bad weather is not forecast, minimum of 2 coats required.

Brush:
Stir thoroughly, before and during use. Brush on product, evenly, along the grain.

Spray:
Stir thoroughly before pouring contents into the Cuprinol sprayer.
Refer to the Sprayer user guide for full instructions before every use.
Cover any nearby surfaces in case of overspray.
Any overspray should be cleaned up immediately (whilst still wet) with water and household detergent.

Dry:
Cuprinol Garden Shades will be touch dry in 1 hour under normal weather conditions.
On areas subject to wear, such as garden furniture, allow a few days before heavy use or contact with soft furnishings.
Believed to be safe, once dry, for use on wood which pets, wild animals and birds come into contact or gnaw.

Clean:
Reseal can after use.
Clean up spills while still wet.
After use, remove as much product as possible from brushes before cleaning with water.
Do not store or use in extremes of temperature and protect from frost.

Cuprinol Garden Shades Woodstain 2.5ltr

Reviews & Ratings