Buildworld: 0116 212 3456

Dulux Trade Diamond Matt Paint

SKU: BW-7585 MFC: 5191767

Variations & Sizes

  1. Step 1
  2. Select Colours
  1. Step 2
  2. Select Litres

Product Description

The Dulux Trade Diamond Matt Paint is the ultimate paint for your interior walls and ceilings and is available in two colours, namely Pure Brilliant White and Magnolia. Its smooth matt finish enhances its longevity and allows you to wipe away marks and stains effortlessly without damaging the paint surface. It includes innovative anti-fade technology that protects the colour pigments in the paint from damage caused by sunlight and other light sources. It ensures that the colour stays true and vibrant, providing long-lasting beauty and results.

  • Suitable for use on interior walls and ceilings
  • Scrub, scuff and stain resistant
  • Ultimate durability
  • Repeatably cleanable smooth matt finish
  • Anti-Fade technology
  • It is a tough and cleanable emulsion with a smooth, even matt finish
  • Contain Anti-Fade Technology to protect colour pigment from damage for truly long lasting colour and beautiful results
  • it's perfect for busy environments that require frequent cleaning as it contains unique Stain Repellent Technology, preventing stains from setting in to the surface and making cleaning up easier
  • It also protects against common scuffs and achieves Class 1 ISO 11998 and Type C BS 7719 scrub ratings, meaning walls withstand daily wear and tear and the finished job looks better for longer.


  • Size
  • 2.5L,5L
  • Finish
  • Matt
  • Colour
  • Magnolia,Pure Brilliant White
  • Coverage
  • 16m² Per Litre
  • Drying Time
  • 2-4 Hours
  • Number Of Coats
  • 1-2 coats
  • Area Of Application
  • For Use On Interior Walls And Ceilings
  • Application Method
  • Brush, Roller or Spray
  • Areas Of Use
  • Interior


+ Delivery & Returns

Dulux Trade Diamond Matt Paint

Dulux Trade Diamond Matt Paint
  • Typical Use :
  • Suitable for interior use on all normal interior wall and ceiling surfaces, especially those subject to high traffic.
  • When overcoating areas previously painted with solvent-based paints, a first coat of Dulux Trade Diamond Eggshell should be used.
  • Film Properties :
  • Chemical Resistance: Not suitable.
  • Heat Resistance: Not suitable for use on heated surfaces, such as radiators.
  • Water Resistance: Resistant to the levels of atmospheric humidity present in normal interior environments and will withstand repeated washing. Suitable for use in kitchens and bathrooms.
  • Not suitable for use on immersed surfaces or where there is heavy and prolonged condensation.
  • Application :
  • Brush,roller or spray . STIR THOROUGHLY BEFORE USE. New or bare surfaces should be prepared with an appropriate Dulux Trade product.
  • We recommend Drywall Primer Sealer or a thinned first coat of Vinyl Matt or Diamond Matt.
  • The normal finishing process is 2 coats of Dulux Trade Diamond Matt, however for significant colour change additional coats may be required.
  • Cleaning :
  • After use, remove as much paint as possible from equipment before cleaning with water
  • Storage :
  • Do not use or store in extremes of temperature and protect from frost
  • Brush, roller, conventional spray or airless spray.
  • As with other water-based paints, do not apply in temperatures below 8ºC (as recommended by British Standard BS 6150).
  • To minimise picture framing or patchy finishes, we strongly recommend stirring the paint thoroughly prior to use. If thinned, the paint used for cutting in and for rolling should be to the same ratio. Cut in one wall at a time, then rolling immediately afterwards, not allowing the cutting-in to dry prior to rolling. Cut in no more than 5 to 8cm away from any internal angles, including sockets/switches, skirting, architraves, etc. Roll into the cutting-in, ensuring you roll as close to the edge as possible.
  • Practical Coverage :
  • A guide to the practical coverage which can be achieved under normal conditions is up to 16m² per litre.
  • Thinning :
  • Sealing new or bare surfaces: Add up to 1 part clean water to 10 parts paint.
  • Normal use (not to be exceeded): Thinning is not usually required.
  • Conventional spray application: Add up to 1 part clean water to 5 parts paint.
  • Airless spray application: Thinning is not usually required.
Frequently Bought Together:
You May Also Be Interested In:

Reviews & Ratings

Rate This Products:

Submit Your Review
Please enter your name
Please enter your city
Please enter your review title
Please enter your review
How Many Stars Would You Give for the Following?
Rate the product on quality
Value For Money:  
Rate the product on value for money
Rate the product on style
Ask A Technical Question
Please enter your name
Please enter your valid email address
Please enter your question
Thank you for feedback We will soon verify the details and add your feedback appropriately.

Thank You For Your Rating

We will soon verify the details and add your rating appropriately.

Delivery & Returns

Thank you for answer feedback

Sorry for the inconvenience. Please try again at a later time.