Buildworld: 0116 212 3456
Dulux Trade Weathershield Gloss Paint Pure Brilliant White
BW-41836 small Image 1
Dulux Paints Logo

Dulux Trade Weathershield Gloss Paint Pure Brilliant White

SKU: BW-41836 MFC: 5180254

Variations & Sizes

  1. Step 1
  2. Select Litres
OP-39340 - 1Ltr

Product Description

Dulux Trade Weathershield Gloss Paint Pure Brilliant White - Litres Available.

  • Weathershield Exterior High Gloss is part 3, of a 3 part weather resistant and flexible paint system
  • Specifically developed to give long-lasting, high gloss protection for exterior woodwork
  • 8 year all weather protection
  • Tough and durable protection
  • Solvent based
  • Contains a fungicide to help protect against the disfiguring effect of mould growths on its film
  • Can be used on plastic gutters, pipes and primed metal such as garage doors
  • For general use on exterior joinery and smooth planed wood. Part 3 of the Weathershield Exterior Gloss System (WEGS)
  • Drying time (recoat - 16-24 hours), (touch dry 4-6 hours)
  • Coverage : Up to 18m² per litre
  • General Number of Coats : 1
  • This product should not be sprayed.


  • Product Type
  • Paint
  • Size
  • 1Ltr, 2.5Ltr, 5Ltr
  • Colour
  • Pure Brilliant White
  • Finish
  • Gloss
  • Drying time recoat
  • 16-24 hours
  • Drying time touch dry
  • 4-6 hours
  • Suitable Surface
  • Wood
  • Coverage
  • Up to 18m² per litre
  • General No. of Coats
  • 1
  • Thinning
  • Not Recommended
  • Suitable for
  • Exterior use
  • Lifespan
  • Up to 10 years
  • Cleanup
  • Brush cleaner or White spirit
  • Base
  • Solvent-Based

+ Delivery & Returns

Dulux Trade Weathershield Gloss Paint Pure Brilliant White

Dulux Trade Weathershield Gloss Paint Pure Brilliant White
  • Film Thickness :
  • Will be dependent on the coverage achieved.
  • Wet: 55 microns.
  • Dry: 34 microns
  • Composition (nominal) :
  • Pigment: Lightfast Pigments.
  • Binder: Alkyd and a Fungicide.
  • Solvent: White Spirit and Low Odour Aliphatic Hydrocarbons.
  • To get the best results, ensure surfaces to be painted are sound, clean and dry (new surfaces particularly must be fully dry).
  • Remove all loose and defective coatings, if necessary stripping back to bare wood.
  • Special precautions should be taken during surface preparation of pre-1960s paint surfaces over wood and metal as they may contain harmful lead.
  • Remove and treat any mould, algae, lichen or moss with Weathershield Multi-Surface Fungicidal Wash*.
  • Remove defective glazing material, clean the rebates and any loose or open joints.
  • Replace any rotten wood and troublesome knots with new timber.
  • Thoroughly rub down all surfaces to remove any grey, weathered wood and surface sheen from remaining coatings, and then dust off . Avoid the inhalation of dust. Wear a suitable face mask if dry sanding.
  • Apply 1 or 2 coats of an appropriate knotting solution to any remaining knots in the wood.
  • Prime all bare wood with 1 coat of Weathershield Preservative Primer+ (BP), including any new or bare replacement beading.
  • Excess primer should be wiped off surrounding paintwork.
  • Prime any bare metal with 1 coat of Dulux Trade Metal Primer.
  • Fill any surface defects, open joints etc. and replace any missing glazing material.
  • New joinery is often factory primed using a stain basecoat (also called a dual-purpose primer). These materials quickly erode when left exposed and may need to be re-primed.
  • Apply 2 coats of the appropriate coloured Weathershield Exterior Flexible Undercoat to all primed wood, followed by 1 coat of Weathershield Exterior High Gloss.
  • Where a special process colour is to be used, or where a strong colour change is required, additional coats will be required
  • When painting resinous wood or woodwork with a history of blistering, it is advisable to use light colours only, particularly on south facing elevations.
  • The maximum benefits of this system will only be realised when used as directed above on good quality timber that conforms to BS EN 942: 1996, in conjunction with good component design.
  • For best colour consistency, purchase sufficient tinted paint for each job including touch-in at one time from the same source.
  • Brush only. For Health Safety reasons relating to all solvent-based paints, spray application is not recommended.
  • As with other solvent-based paints, do not use in temperatures below 5 degree C (as recommended by British Standard BS 6150).
  • Cleaning Up :
  • After use, remove as much product as possible from equipment before cleaning with brush cleaner
  • Storage :
  • Do not use or store in extremes of temperature and protect from frost.
  • To prevent spillage, please store and transport upright.
Frequently Bought Together:
You May Also Be Interested In:

Reviews & Ratings

Rate This Products:

Submit Your Review
Please enter your name
Please enter your city
Please enter your review title
Please enter your review
How Many Stars Would You Give for the Following?
Rate the product on quality
Value For Money:  
Rate the product on value for money
Rate the product on style
Ask A Technical Question
Please enter your name
Please enter your valid email address
Please enter your question
Thank you for feedback We will soon verify the details and add your feedback appropriately.

Thank You For Your Rating

We will soon verify the details and add your rating appropriately.

Delivery & Returns

Thank you for answer feedback

Sorry for the inconvenience. Please try again at a later time.