Name: Hammerite Smooth Metal Paint
Brand: hammerite
SKU: BW-41774
Price: 14.23 GBP
Availability: InStock

Hammerite Smooth Metal Paint - Variation Available.

Hammerite Direct To Rust Metal Paint is a single pack air-drying coating which delivers a
decorative, corrosion resistant finish.
Fast drying and can be recoated after 4 hours.
The specially selected resins impart a gloss or satin finish which resists dirt pick up.
Excellent wetting properties making it tolerant to poorly prepared ferrous surfaces.
Use as a corrosion-resistant and decorative coating for ferrous metals and certain plastics.
Can be applied directly onto rusty metal by roller or brush.
Primer or undercoat are not necessary.
COVERING CAPACITY : Up to 5 m2/L for two coats at recommended dry film thickness (brushing).
3 in 1 Paint: Primer undercoat and topcoat all in one
Up to 5x better anti-rust protection compared to regular metal paints
DUALTECH technology provides two-way protection
Quick Drying enables quick recoat
Resists dirt pick up
Available Colours :
Smooth Black
Smooth Blue
Smooth Dark Green
Smooth Gold
Smooth Red
Smooth Silver
Smooth White
Smooth Yellow

£14.23^Each

Usage Guide :
Remove all loose rust and flaking paint from the metal using a wire brush.
If the metal was already painted, wash down thoroughly with diluted detergent, rinse with clean water and allow to dry.
To ensure compatibility, apply a small test patch of Hammerite Direct to Rust Metal Paint Smooth Finish to the painted surface. Any reaction will occur within an hour. If a reaction is evident, remove all paint then wash down with degreaser. Rinse with clean water and allow to dry.
If the objects are made from bare zinc, aluminium or galvanized metal use Hammerite Direct to Galvanised Metal Paint.
For smooth metal surfaces, lightly abrade for maximum adhesion.
Cover the surface beneath the metal object with thick newspaper or a dust sheet to catch any spills or drips.
Stir the paint thoroughly before use, and apply with a good quality brush. A narrow brush is best for use on railings. A broad is best for use on bigger metal object, like a garden table.
Apply two thin coats of Hammerite Direct to Rust Metal Paint in Smooth finish for the best results, leaving to dry in between as per instructions on back of pack.

Storing :Observe the label precautions.
Store in a cool, dry, well ventilated place away from sources of heat, ignition and direct sunlight.
No smoking. Prevent unauthorised access.
Containers which are opened should be properly resealed and kept upright to prevent leakage.
Do not use or store any paint container by hanging on a hook.

Hammerite Smooth Metal Paint

Reviews & Ratings