Sales:   0116 212 3456

Leyland Trade Undercoat Paint

SKU: BW-24381 MFC: 264784
Leyland Trade Undercoat Paint

Variations & Sizes

  1. Step 1
  2. Select Colour
  1. Step 2
  2. Select Litres

Product Description

Leyland Trade Undercoat Paint - More Colours And Sizes Available.

  • A dense covering, alkyd-based undercoat, the ideal foundation for Leyland High Gloss.
  • Suitable for interior and exterior use providing a smooth surface on both wood and metalwork.
  • The ideal base coat for gloss
  • High opacity, so comes with great hiding power
  • A dense covering, alkyd-based undercoat
  • Suitable for use in: Interior and exterior
  • Type of substrate - Wood and metal.
  • Finish - Matt
  • Volume solid - 55%
  • Coverage - 1 litre will cover approximately 17 square metres, depending on the nature and porosity of the surface.
  • Drying time - Touch dry in 4-6 hours. Recoatable after 16-24 hours.

Specification

  • Pack Size
  • 750ml / 2.5 Litre / 5 Litre
  • Colour
  • White / Cream / Dark Grey / Dark Red / Mid Grey / Pearl, Red
  • Finish
  • Matt
  • Application Method
  • Brush, Roller
  • Base
  • Solvent-based
  • Coverage
  • 17 square metres per litre
  • Touch dry
  • 4-6 hours
  • Recoatable
  • 16-24 hours
  • VOC level
  • High
  • Recommended uses
  • Interior, Exterior

+ Delivery & Returns

Leyland Trade Undercoat Paint

£9.89Each
Leyland Trade Undercoat Paint
  • Preparation :
  • Ensure surface to be painted is sound, clean, dry and free from grease.
  • Remove all loose and defective paint.
  • Prime all new and bare surfaces with the appropriate Leyland Primer.
  • Rub down sound previously painted surfaces with fine waterproof abrasive paper to provide a key.
  • Avoid the inhalation of dust. Wear a suitable face mask if dry sanding.
  • Special precautions should be taken during surface preparation of pre-1960s paint surfaces over wood and metal as they may contain harmful lead.
  • Application :
  • Stir well before use. Suitable for application by brush or roller.
  • The brush should be fully loaded for best results. Do not thin.
  • Apply one or more coats as required and allow 16-24 hours drying between coats under normal conditions.
  • Do not apply over polystyrene surfaces.
  • Cleaning :
  • Remove as much product as possible from application equipment before cleaning.
  • Clean equipment immediately after use with White Spirit or Turpentine Substitute.
  • Do not empty product into drains or watercourses.
  • Replace lid firmly.
  • Warning :
  • Keep out of reach of children.
  • Avoid contact with skin and eyes.
  • Do not ingest.
  • If medical advice is needed have container or label to hand.

Frequently Bought Together:

You May Also Be Interested In:

Reviews & Ratings

Rate This Products:


Submit Your Review

Please enter your name
Please enter your city
Please enter your review title
Please enter your review
How Many Stars Would You Give for the Following?
Quality:  
Rate the product on quality
Value For Money:  
Rate the product on value for money
Style:  
Rate the product on style

Ask A Technical Question

Please enter your name
Please enter your valid email address
Please enter your question

Thank you for answer feedback

We will soon verify the details and add your feedback appropriately.

Thank You For Your Rating

We will soon verify the details and add your rating appropriately.

Delivery & Returns

Thank you for answer feedback

Sorry for the inconvenience. Please try again at a later time.