Name: Macpherson Gloss Paint
Brand: macpherson
SKU: BW-24939
Price: 10.34 GBP
Availability: InStock

Macpherson Gloss Paint - Various Colours And Litres Available

Macpherson Gloss allows you to achieve the high sheen finish you can be proud of, and because we use a superior quality alkyd resin in the formulation, those good looks will stand the test of time
Drying time : Under normal drying conditions touch dry after 4-6 hours, recoatable after 16-24 hours. Allow for adequate ventilation during the drying period. A characteristic of the new technology used in this product is that whiteness intensifies as the paint dries
Finish : Gloss
Spreading rate : 12-15? per litre depending on surface texture
Wet film thickness : 67 micrometres at 15? per litre
Dry film thickness : 34 micrometres at 15? per litre
Volume solids : 51% White other colours will vary
Flash point : 40 degree C (closed cup)

£10.34^Each

Limitations :
Do not apply when air or substrate temperatures are likely to fall below 5 degree C or when the relative humidity is above 80% during application or the drying period

Application :
Stir well before use.
Apply by brush to an even thickness (a fine, soft long filament bristle brush gives best results).
Maintain a wet edge.
On timber lay off in the direction of the grain

Preparation :
Timber : All surfaces must be suitably dry, and free from anything that will interfere with the adhesion of the materials to be applied. Rub down with a suitable grade of abrasive paper and round sharp edges 1-3mm. Remove all dust. Treat knots with two thin coats of fresh knotting. Fill any fixing holes, open joints and shallow surface defects. Remove all dust. Prior to priming the moisture content of the substrate should not exceed 18%.
All metals including galvanised : Surfaces must be clean and free from anything that will interfere with the materials to be applied. Wash with hot water and liquid detergent solution to remove oil, grease or any other contaminants, frequently changing the water. Rinse thoroughly with clean water. Allow to dry. Galvanised surfaces should be pre-treated with Decorators Choice Passivating Wash. Overall blackening of the surface will confirm satisfactory surface preparation

Macpherson Gloss Paint

Reviews & Ratings