Buildworld: 0116 212 3456
Dulux Trade Stain Block Plus White Primer
BW-41790 small Image 1
Dulux Paints Logo

Dulux Trade Stain Block Plus White Primer

SKU: BW-41790 MFC: 5183284

Variations & Sizes

  1. Step 1
  2. Select Litres
OP-39333 - 1 Litre

Product Description

Dulux Trade Stain Block Plus Primer - Various Litres Available.

  • Water-based primer
  • Suitable for use on interior walls and ceilings
  • Formulated to prevent the migration of stains through the finished paint film and also to seal and bind dry, friable and powdery interior surfaces such as plaster, brick and distemper
  • It is the effective treatment for stains caused by: water-based and solvent-based inks, crayon, biro, coffee, grease, scuff marks, water and nicotine
  • Complete stains coverage and block stains
  • Gets big projects done faster
  • Water-based formula guarantees no unpleasant odour
  • For stains including smoke damage, nicotine inks
  • Seals powdery surfaces, limewash and distemper
  • Coverage : Up to 14m² per litre.
  • This product does not require thinning.


  • Size
  • 1 Litre, 2.5 Litre, 5 Litre
  • Colour
  • White
  • Coverage
  • 14m2Per Litre
  • Recoatable
  • After 6-8 hours
  • VOC level
  • Low
  • Thinning
  • Do not thin
  • Cleanup
  • Water & Detergent
  • Base
  • Water-Based

+ Delivery & Returns

Dulux Trade Stain Block Plus White Primer

Dulux Trade Stain Block Plus White Primer
  • Drying Times :
  • Single coat at standard thickness:
  • Touch Dry: Dependent on temperature and humidity.
  • Recoat: 6-8 hours. Note: on very porous surfaces, a longer drying time may be required.
  • Brush or short pile roller only. Do not spray.
  • As with all water based paints, do not apply at temperatures below 8 degree C (as recommended by British Standard BS 6150).
  • This product is not suitable for spraying.
  • After suitable surface application, apply 1 coat to all bare or stained surfaces and allow to dry.
  • Two coats will be necessary for difficult stains.
  • When blocking stains caused by water or damp, make sure the original cause of the problem has been rectified. When Dulux Trade Stain Block
  • Primer is applied initially, it will draw the stain into itself and then seal it – this is not a defect.
  • Finish with an appropriate Dulux Trade paint system.
  • To get the best results, ensure surfaces to be painted are sound, clean and dry (new surfaces particularly must be fully dry) and free from all defective or poorly adhering material such as efflorescence, dirt, grease or wax.
  • Where necessary, surfaces should be rubbed down using a suitable abrasive paper and then dusted off (refer to your COSHH Assessment).
  • Do not abrade before recoating.
  • Special precautions should be taken during surface preparation of pre-1960s paint surfaces over wood and metal as they may contain harmful lead.
  • Storage :
  • Do not use or store in extremes of temperature and protect from frost.
  • To prevent spillage, please store and transport upright.
Frequently Bought Together:
You May Also Be Interested In:

Reviews & Ratings

Rate This Products:

Submit Your Review
Please enter your name
Please enter your city
Please enter your review title
Please enter your review
How Many Stars Would You Give for the Following?
Rate the product on quality
Value For Money:  
Rate the product on value for money
Rate the product on style
Ask A Technical Question
Please enter your name
Please enter your valid email address
Please enter your question
Thank you for feedback We will soon verify the details and add your feedback appropriately.

Thank You For Your Rating

We will soon verify the details and add your rating appropriately.

Delivery & Returns

Thank you for answer feedback

Sorry for the inconvenience. Please try again at a later time.