Product Description
Work more efficiently and effectively when you apply the Evo-Stick 528 Contact Adhesive 5L. This fast-acting adhesive can be used for most interior projects as well as a few exterior ones, but only in areas that are protected from the weather, such as excessive sun and rain. This toluene-free formula has been improved upon to offer a cleaner, purer product that also has less odour. You can use it to bond materials like rigid PVC, decorative laminates, wood, cork, leather, hardboard, chipboard, metal, stone and even firm, dense fabrics, making it a true catch-all.
- Manufacturing code of this product is 30021180
- EVO-STIK 528 Instant Contact Adhesive is a multi-purpose adhesive which bonds immediately on contact
- Offering high shear strength and good temperature resistance
- It is intended for interior use, but may also be used outside where it can be protected from the weather
- The new improved (toluene free) formulation has a lower odour and is clearer
- Suitable Material decorative laminates, rigid PVC, wood, chipboard, hardboard, cork, leather, rubber, stone, metal, ceramics, glass
- Also be used to bond insulating fibre boards and acoustic tiles to suspended or vertical surfaces such as flat-surfaced ceilings or walls
- Do not use the Adhesive on polystyrene or on cellulose painted surface
- Translucent Amber in colour
- 5L Pack.
+ Delivery & Returns
- Features And Benefits:
- Multi-purpose adhesive which bonds immediately on contact
- High shear strength
- Good temperature resistance
- Excellent final bond strength.
- Application:
- Apply an even ribbed coat of adhesive to both surfaces using a serrated trowel or spreader
- For correct coverage use the spreader at an angle to give good rib formation after drying
- Work in warm, dry and wellventilated conditions
- Cold and or high humidity will lead to poor drying and hence a poor bond
- Allow the adhesive to become just touch dry
- The drying time will depend upon film thickness, surface porosity, temperature, humidity and ventilation
- In good conditions the approximate drying times for porous surfaces are 15 to 20 minutes and for nonporous surfaces 25 to 35 minutes
- For best results bring the two dry, coated surfaces into contact within 10 minutes of the adhesive films becoming ‘touch dry’ and press together over the entire bond area
- Apply as much pressure as possible by hand or roller
- Sustained pressure is unnecessary
- Bringing the surfaces together before the surfaces are touch dry will result in solvent being trapped
- Adversely affecting the final bond, and possibly giving rise to blistering problems
- Bonding too late will leave large areas un-bonded which will later give rise to blisters, due to differential movement
- A bond is formed as soon as the two surfaces touch
- It is hence essential with large areas to avoid contact before the parts are in alignment
- The initial bond strength allows for immediate handling of the assembly, but maximum bond strength is reached after approx.
- 24 hours at normal temperatures.
- Cleaning:
- Remove as much of the adhesive as possible by mechanical means
- The remainder of the adhesive can be removed using a cloth dampened with acetone or EVO-STIK Adhesive Cleaner
- Always check if the cleaning solvent might damage a nearby surface by testing.
Specification
- Colour
- Translucent amber
- Form
- Thixotropic gel
- Specific Gravity
- Approx. 0.84
- Composition
- Blend of polychloroprene rubber and synthetic resins, in a mixture of petroleum solvents
- Odour
- Sweet hydrocarbon
- Application Temperature
- +5°C to +30°C
- Service Temperature
- -40°C to +65°C
- Coverage
- 4 - 6m2 per litre per coat. Depending upon surface type
- Open Time
- Up to 45 minutes
- Container Size
- 5 Litre
Added to Cart
