Product Description
Sandtex Trade Solvent Stabilising Solution 5L.
- A solvent-borne solution to stabilise chalking decorative finishes and to control suction on undecorated surfaces.
- For use on most exterior masonry surfaces and exterior grade building boards. Awarded a British Board of Agrement Certificate when used in conjunction with other certificated Sandtex Trade protective and decorative finishes.
- One Coat Application
- Treats chalking, weathered and porous surfaces
- Colourless
- Solvent-based
- Drying time - Under normal drying conditions recoatable after 16 hours
- Spreading rate - 6m2 per litre. On textured and surfaces with suction the spreading rate will vary down to approx. 3m2 per litre.
- Wet film thickness - 167 micrometres at 6m2 per litre.
- Dry film thickness - 41 micrometres at 6m2 per litre.
- Volume solids - 25%.
- Flash point - 40 degree C (closed cup)
+ Delivery & Returns
- Limitations :
- Do not apply when there is a risk of rain, air or substrate temperatures are likely to fall below 8 degree C or when the relative humidity is above 80% during application or the drying period.
- Do not apply to bitumen coatings.
- The decoration of Fletton brickwork either facings or commons is not recommended.
- COATING SYSTEM :
- Apply in one liberal coat until suction, porous, friable or chalking surfaces are stabilised.
- Do not over stabilise.
- APPLICATION :
- Apply by brush.
- CLEANING :
- Return surplus material to container.
- Clean with a proprietary cleaner immediately after use.
Specification
- Type
- Preparation / Stabilising Solution
- Pack Size
- 5 Litre
- Colour
- Colourless
- Application Method
- Brush
- Coverage
- Up to 6m2/litre
- Drying Time
- 16 hours
- Suitable for
- Exterior
- Substrates
- Masonry
- Base
- Solvent-Based