Product Description
Ronseal Decking Cleaner & Reviver is specially formulated to clean and revive weathered or tired timber decking. The effective formula removes unwanted growths of mould and algae from the wood and thereby restores its natural appearance. It can be used over stains and oils as a coat prior to finishing with fresh paint or stains.
- Manufacturing code of this product is -35903
- Ronseal Decking Clearner is a quick and easy way to clean a deck
- Removes unsightly dirt, grease, fungus and stains and restores naturally weathered wood
- Ideal for use prior to application of a decking finish
- It is really great to use before putting on a decking stain or oil because it helps them to stick to the deck, so it’ll look great for longer
- It takes 24 hours to dry and will cover up to 5m² per litre on average
- Prepares new wood, revives weathered wood keeps your deck clean
- Apply with a Brush
- Clean decking prior to finishing the deck with an oil or stain
- It can be used as a general cleaner, brightening and enhancing your deck throughout the season.
+ Delivery & Returns
- Features And Benefits :
- Helps to make your coating last longer
- Fast acting, so no waiting to get clean
- Can be used over stains and oils
- Control air pollutants by choosing products with lower solvent levels
- Safe use around plants and pets
- Suitable for all types of decking
- Helps remove pre-treatment on brand new decks
- Can act as a general cleaner to brighten decking.
- Application:
- Pour the Decking Cleaner Reviver directly onto your decking
- Use a stiff brush and scrub the surface straight away
- Leave it alone for 15-20 minutes
- Use a pressure washer to wash off the cleaner and remove dirt. Work from one end of a decking board to the other in one continuous motion
- If you don’t have a pressure washer, scrub the surface with a stiff brush and hose it down
- Make sure you remove all cleaning residue for the best results
- Allow the deck to dry thoroughly before applying new coatings
- Tip:
- Ronseal Decking Cleaner Reviver can also be used to remove waterproofing treatment present on new decks; just follow the steps above. When you're done and the deck is dry, sprinkle a small amount of water on the deck and make sure it doesn't bead on the surface; if it doesn't bead then the pre-treatment is removed.
- Aftercare:
- Cleaning-
- If any Decking Cleaner comes into contact with surrounding grass or plants, rinse them thoroughly with water
- Don’t allow undiluted product to enter drains or watercourses. For information on how to properly dispose of your cleaner, get in contact with your local council
- Maintenance-
- Use Decking Cleaner Reviver regularly to enhance the look of your deck. Check your deck each year and recoat as needed using either Ronseal Ultimate Protection Decking Stain for durable colour and protection or Ronseal Ultimate Protection Decking Oil for a natural colour and nourishment.
- Download installation instruction PDF.
Specification
- Usage
- Ridged or smooth hardwood and softwood decking
- Colour
- Clear
- Litre capacity L
- 5L
- Coverage
- Up to 5m2 per litre
- Application
- Pour straight on the deck
- Number of coats
- One
Added to Cart
