Buildworld: 0116 212 3456
Ultra TileFix ProPrimer Advanced Polymer Primer
BW-27161 small Image 1
Ultra Tile Fix Logo

Ultra TileFix ProPrimer Advanced Polymer Primer


Variations & Sizes

  1. Step 1
  2. Select Size
OP-10869 - 1L

Product Description

Ultra TileFix ProPrimer Advanced Polymer Primer can be used on various surfaces and comes in 1L & 5L Bottles. Useful in pre-painting preparation, the primer dries clear or to a milky white Depending on the dilution, it gives a coverage between 14-20m² or 28-40m². It has excellent adhesion properties and will get you the desired results without fuss. Application Temperatures needed are 5 degrees C to 25 degrees C.

  • Advanced polymer primer for exceptional bond and multiple substrates
  • Can be used on walls or floors
  • Designed for both porous and non-porous substrates
  • Enhances adhesion and reduces substrate porosity
  • Suitable for calcium sulphate screeds
  • Underfloor heating
  • Internal surfaces
  • Size: 1L 5L
  • Colour: Milky White / Dries Clear
  • Lifetime guarantee


  • Product Type
  • Polymer Primer
  • Size
  • 1L & 5L
  • Guarantee
  • Lifetime
  • Coverage
  • Per litre : 1:1 Dilution 14-20m², 3:1 Dilution 28-40m², Neat 5-10m² - Per 5L bottle: 1:1 Dilution 70-100m², 3:1 Dilution 140-200m², Neat 25-50m²
  • Storage
  • Must be stored in unopened
  • Application Temperatures
  • Between 5 degree C and 25 degree C
  • Shelf Life
  • 12 months

+ Delivery & Returns

Ultra TileFix ProPrimer Advanced Polymer Primer

Ultra TileFix ProPrimer Advanced Polymer Primer
  • Suitable Surfaces And Substrates:
  • Concrete (porous)
  • Sand/cement screed (porous)
  • Plywood overlay (15mm min, non-porous)
  • Tile backer boards (porous)
  • Cement faced fibre boards (porous)
  • Anhydrite screeds (porous)
  • Tile on Tile (non-porous) - Existing ceramic, porcelain and natural stone tiles (overlay) known as “Tile on Tile”
  • Firm and stable plaster (porous)
  • Plasterboard (porous)
  • Sand/cement render (porous)
  • Concrete brick/block (porous)
  • Hard vinyl tiles (non-porous)
  • Flooring grade asphalt (non-porous)
  • Ensure the application area is thoroughly dry and in a sound and stable condition.
  • The surface must be free from contaminants that may hinder adhesion such as dust, oils and grease.
  • All laitance and surface treatments must be removed.
  • Surfaces must be roughened by mechanical scabbing to enhance the key.
  • All surfaces should be free from dust and thoroughly clean before the primer is applied.
  • Underfloor heating must be switched off for at least 48 hours before and after application.
  • When applying UltraTileFix ProPrimer onto a calcium sulphate screed the following preparation should also be considered in addition to the above. It is particularly important that calcium sulphate screeds are ensured dry and below 75%RH. These screeds are also prone to surface laitance and therefore should be mechanically abraded to remove this weak surface.
  • The product should be applied using a brush or roller and scrubbed well into the surface to avoid pooling.
  • Allow to fully dry.
  • For multi-coats, ensure each coat dries before you apply the next.
  • UltraTileFix ProPrimer should always be diluted before use.
  • 1st coat: 3 parts water/1 part primer
  • 2nd coat: 1 parts water/1 part primer
  • Very absorbent subfloors will always require a 3rd coat at 1 parts water/1 part primer. Under good drying conditions, UltraTileFix ProPrimer should be ready to receive an additional coat after 1-2 hours
  • 1 coat neat
  • Coverage:
  • Per litre of primer:
  • 1:1 Dilution 14-20 m2
  • 3:1 Dilution 28-40 m2
  • Neat 5-10m2
  • Per 5L bottle:
  • 1:1 Dilution 70-100 m2
  • 3:1 Dilution 140-200 m2
  • Neat 25-50 m2
  • Tools should be thoroughly cleaned with water to remove excess material immediately after use and before adhesive sets.
  • This product must be stored in unopened bottles, in a frost free environment out of direct sunlight. Avoid frost. Ideal storage temperatures are between 5 degree C and 25 degree C.
  • Under the above storage conditions this product has a shelf life of 12 months.
Frequently Bought Together:
You May Also Be Interested In:

Reviews & Ratings

Rate This Products:

Submit Your Review
Please enter your name
Please enter your city
Please enter your review title
Please enter your review
How Many Stars Would You Give for the Following?
Rate the product on quality
Value For Money:  
Rate the product on value for money
Rate the product on style
Ask A Technical Question
Please enter your name
Please enter your valid email address
Please enter your question
Thank you for feedback We will soon verify the details and add your feedback appropriately.

Thank You For Your Rating

We will soon verify the details and add your rating appropriately.

Delivery & Returns

Thank you for answer feedback

Sorry for the inconvenience. Please try again at a later time.