Buildworld: 0116 212 3456

Ultra TileFix ProGrout Flexible Grout For Walls And Floors

SKU: BW-27159 MFC: FLEXGROUT3G

Variations & Sizes

  1. Step 1
  2. Select Size
  1. Step 2
  2. Select Finish

Product Description

Ultra TileFix ProGrout Flexible Grout For Walls And Floors come in a range of  Colours and Sizes. The smooth grout has been formulated for use with tiles with joint widths up to 12mm and can be used in both wet and dry conditions. It is compatible with ceramic, porcelain and natural stone tiles and ideal for large non-flexible areas. It is mould resistant and available in 3kg & 10kg sizes.

  • UltraTileFix ProGrout Flexible has been designed for areas where movement or vibration is likely. Polymer has been added to the formulation to increase flexibility and to provide a virtually impermeable set.
  • Suitable for joint widths up to 20mm.
  • ProGrout Flexible is packaged using the latest plastic packaging technology, offering you greater product protection and prolonged freshness.
  • Designed for use with all tile types
  • ColourShield technology for vibrant durable finishes
  • Ideal for wetrooms, swimming pools and underfloor heating systems
  • Wash down with minimal effort
  • 1-20mm joint thickness
  • 30 – 60 minutes pot life
  • 12 hours hard set
  • Mould resistant
  • Conforms to CG2 WA EN 13888 classification
  • Sizes: 3kg 10kg
  • Colours: White, Cream, Bahama Beige, Jasmine, Limestone, Taupe, Brown, Silver Grey, Mid-Grey, Grey, Charcoal Black
  • Lifetime guarantee

Specification

  • Product Type
  • Flexible Grout For Walls And Floors
  • Unit Size
  • 10kg & 3kg Bags
  • Colours
  • White, Cream, Bahama Beige, Jasmine, Limestone, Taupe, Brown, Silver Grey, Mid-Grey, Grey, Charcoal and Black
  • Classification
  • EN13888 CG2 WA
  • Application Thickness
  • 1mm – 20mm
  • Initial Drying Time
  • 10-15 Minutes
  • Pot Life
  • 30-60 Minutes
  • Light Foot Traffic
  • 3-4 Hours
  • Hard Set Time
  • 12 Hours
  • Application Temperatures
  • 5 degree C to 25 degree C
  • Storage
  • Must be stored in unopened bags, clear of the ground in dry conditions.
  • Shelf Life
  • 12 months

+ Delivery & Returns

Ultra TileFix ProGrout Flexible Grout For Walls And Floors

£13.84Each
Ultra TileFix ProGrout Flexible Grout For Walls And Floors
  • Key Areas of Use
  • General wall installations
  • General floor installations
  • Interior installations
  • Exterior installations
  • Wet rooms
  • Domestic showers with tray
  • Communal showers
  • Swimming pools
  • Electric matting underfloor heating
  • Piped water underfloor heating
  • Conservatories
  • Suitable Tiles
  • Ceramic
  • Porcelain
  • Glass
  • Mosaics
  • Marble
  • Travertine
  • Granite
  • Limestone
  • Terracotta
  • Quarry
  • Slate
  • Resin Backed
  • Quartz
  • Brick Slips
  • Surface Preparation
  • Ensure that the tile adhesive is completely set and that the tiles are firmly fixed. All joints should be free from excess adhesive, dust, grease or any other contaminants.
  • Mixing
  • UltraTileFix ProGrout Flexible should be added slowly to clean water in a suitable mixing vessel in the approximate by volume ratio as indicated on the side. Mix until a smooth consistency is achieved, leave to stand for 2 minutes then remix. Do not mix more than can be used in a 30-45 minutes period, do not rewet or add too much water. This will cause a weakening of the grout and a tendency to crumble. In certain cases this may also lead to discolouration in the form of efflorescence.
  • Application
  • The grout should be applied to the surface using a rubber backed trowel or squeegee. Work the mixed material thoroughly into the joints a small area at a time. Ensure that the joints are completely filled without voids before continuing. Excess grout should be removed as grouting proceeds. Any residue left on the face of the tile can be removed by wiping with a damp sponge when the grout has started to firm (approximately 15 minutes - when using a normal ceramic tile. On non-absorbent tiles such as porcelain, this may take up to an hour). Any dry film remaining once the job is complete can be polished off the face of the tiles with a soft dry cloth. Finishing when the grout is not firm to the touch, may lead to joints being emptied or potential colour variation
  • Cleaning
  • Tools should be thoroughly cleaned with water to remove excess material immediately after use and before the grout sets.
  • Storage
  • This product must be stored in unopened bags, clear of the ground in dry conditions. Avoid frost. Ideal storage temperatures are between 5 degree C and 25 degree C.
  • Shelf Life
  • Under the above storage conditions this product has a shelf life of 12 months.
  • Health & Safety
  • Please ensure that appropriate PPE is used when preparing, mixing and applying products. Always wash hands before consuming food and make sure that materials are kept safely out of reach of children and animals. Please dispose of packaging and waste appropriately
Frequently Bought Together:
You May Also Be Interested In:

Reviews & Ratings

Rate This Products:


Submit Your Review
Please enter your name
Please enter your city
Please enter your review title
Please enter your review
How Many Stars Would You Give for the Following?
Quality:  
Rate the product on quality
Value For Money:  
Rate the product on value for money
Style:  
Rate the product on style
Ask A Technical Question
Please enter your name
Please enter your valid email address
Please enter your question
Thank you for feedback We will soon verify the details and add your feedback appropriately.

Thank You For Your Rating

We will soon verify the details and add your rating appropriately.

Delivery & Returns

Thank you for answer feedback

Sorry for the inconvenience. Please try again at a later time.