Name: Cuprinol Ultra Tough Wood Filler
Brand: cuprinol
SKU: BW-41651
Price: 16.32 GBP
Availability: InStock

Cuprinol Ultra Tough Wood Filler - Variation Available.

Cuprinol Ultra Tough Wood Filler is a tough and durable formula for repairing damage caused by wet rot and for major joinery repairs.
Use before varnishing, painting or staining bare wood to repair decayed wood.
It may also be used indoors and outdoors on sound wood, e.g. furniture, panelling, etc. to fill knot holes, screw and nail holes etc.
It is fast setting, non-shrinking, weather resistant with good adhesion to sound wood.
It can be sanded, filled, drilled, screwed and nailed when dry.
Gives long lasting weather resistant repair
Can be screwed, sanded, filled and painted
Resists shrinking, splitting and cracking.
Fills holes of any size or depth (under normal conditions).
High performance and long lasting wood repair, including deep holes - interior and exterior
Suitable Surface - Wood

£16.32^Each

Application :
Only mix an amount of Cuprinol Ultra Tough Wood Filler that can be used within 10 minutes.
Using a hard surface such as the plastic lid of the container or a wooden board, mix the filler and catalyst paste with a spatula or putty knife in the proportions of a golf ball size of filler to 40mm (1.5 inch) thread of catalyst paste from the tube.
Mix thoroughly until no streaks remain and the colour is uniform.
NB. Adding too much catalyst will cause the filler to become very hot, to dry very quickly, and affect its performance.
Apply a thin coat of mixed filler to the repair, pressing well in to get good adhesion.
Immediately fill in the remainder of the hole, leaving slightly proud for smoothing down.
Allow to set hard, this takes about 30 minutes under normal conditions.
Smooth to the required contours using sandpaper or file.
The repair can then be finished with either a paint or woodstain. (A slight tackiness may occur on the surface, but this will not affect smoothing down, painting or staining).
TIP: the filler will accept paints and woodstains such as Cuprinol and Dulux Trade Woodstains, although the degree to which it may show through will be influenced by the preparation, the nature and characteristics of the wood as well as the type and application of the woodstain. Try a test area to ensure satisfaction before proceeding.

Preparing the Surfaces :
Identify the full extent of any decay by probing the wood with a sharp instrument.
Cut out all badly decayed and very soft wood.
Remove paint, varnish, dirt or loose material from the area for repair and immediately around it for about 25-50mm (1- 2 inches). If wood is wet, allow it to dry thoroughly before using
For best results, pre-treat the repair area with an appropriate Cuprinol wood preserver and allow it to dry.
Ensure the chosen colour is the nearest match to the wood being filled.
TIP: to obtain better anchorage of the Wood Filler in deep holes (greater than 25mm or 1 inch), fix screws into the bottom of the holes leaving the heads and stems exposed inside the holes.

Cleaning :
Remove as much product as possible from the application equipment before cleaning with brush cleaner

Cuprinol Ultra Tough Wood Filler

Reviews & Ratings