Product Description
Dulux Trade Quick Dry MDF White Primer 2.5 Litres.
- Dulux Trade Quick Dry MDF Primer Undercoat is a water-based primer
- Suitable for use on MDF (Medium Density Fibreboard) surfaces both inside and outside.
- It is quick drying and low odour when compared to solvent-based primers.
- For interior and exterior use
- Primers and undercoats in one
- A water-based dual purpose primer and undercoat for use on MDF surfaces both inside and outside
- Formulation: Water-based
- Pack size: 2.5L
+ Delivery & Returns
- Drying Times :
- Single coat at standard thickness
- Touch Dry: Dependent on temperature and humidity.
- Recoat: 2 hours
- Key benefits:
- For MDF surfaces inside and outside
- Quick-drying
- Low odour
- Primes and undercoats in one
- System Information:
- To get the best results, make sure surfaces to be painted are sound, clean and dry
- After suitable preparation apply 1 coat of Quick Drying MDF Primer Undercoat to all bare surfaces and allow to dry
- After use remove as much paint as possible from brushes before cleaning with clean water.
- SURFACE PREPARATION :
- To get the best results, ensure surfaces to be painted are sound, clean and dry (new surfaces particularly must be fully dry) and free from all defective or poorly adhering material such as dirt, grease or wax.
- Thoroughly rub down previously painted surfaces, using ‘wet flatting’ methods where possible, then wipe off with a damp, lint free cloth.
- Special precautions should be taken during surface preparation of pre-1960s paint surfaces over wood and metal as they may contain harmful lead.
- Spot prime all nail heads and metal fixings with 1 coat of an appropriate Dulux Trade metal primer.
- Any surface defects should be filled with the appropriate Polycell Trade Polyfilla.
- APPLICATION METHOD :
- Brush, roller and airless or conventional sprays.
- When applying by brush, a good quality synthetic (nylon polyester) brush designed for use with water-based paints will give the best results.
- As with all water based paints, do not apply at temperatures below 8 degree C (as recommended by British Standard BS 6150).
- Thinning :
- Sealing new or bare surfaces: Add up to 1 part clean water to 5 parts paint.
- Normal use (not to be exceeded): Add up to 1 part clean water to 10 parts paint.
- Conventional spray application: Add up to 1 part clean water to 2.5 parts paint.
- Airless spray application: Add up to 1 part clean water to 5 parts paint.
- Spray Recommendations :
- Conventional Spray: Satisfactory through most equipment.
- Airless Spray: A typical set up for airless spray application would be a minimum working pressure on paint of 133 bars (2000 lb/sq in) with a spray tip size of 0.43mm (17 thou) and a spray tip angle of 60º.
Specification
- Size
- 2.5L
- Colour
- White
- Coverage
- 13m2 Per Litre
- Drying Time
- Dependent Upon Temperature / Humidity
- Recoatable
- After 2 hours