Product Description
The Ultra TileFix ProSuper Grip High Grab Acrylic Wall Tile Adhesive
will add a new level of efficiency and reliability to your tiling
projects. This high-performance adhesive is engineered specifically for
vertical applications, ensuring a strong bond and immediate hold with
minimal slippage. It is the perfect solution for challenging
installations, including "Tile on Tile" applications where new tiles are
placed over existing ceramic, porcelain or natural stone surfaces. Its
acrylic-based formula provides enhanced strength and flexibility,
ensuring a durable bond that lasts a lifetime.
- Cement faced fibre boards
- Tile on Tile
- Existing ceramic, porcelain and natural stone tiles (overlay) known as “Tile on Tile”
- Firm and stable plaster
- Plasterboard
- Sand/cement render
- Concrete brick/block
+ Delivery & Returns
- SURFACE PREPARATION :
- Ensure all areas are clean, dry and free from dust or any other contaminating barriers. Remove any flaking or peeling layers. Substrates should be strong enough to support the weight of the adhesive and tiles being fixed (see below for loadings).
- Plaster: Tile only onto a finished coat. leave new plaster for at least 4 weeks in order for it to be strong enough to support the tiling weight. Total weight of the tile and adhesive should not exceed 20kg/m2.
- Cement/sand Render: Leave new surfaces to dry out for at least 4 weeks before tiling.
- Brickwork/Concrete: Leave new surfaces to dry out for at least 4 weeks.
- Plasterboard/Fibre Reinforced Cement Sheets: Boards should be braced and screwed horizontally and vertically at 300mm centres. When fixing to plasterboard the total weight of the tile and adhesive should not exceed 32kg/m2.
- Domestic Showers: Ensure 100% solid bed coverage is achieved. Do not leave voids as this will trap water and cause adhesive failure.
- Tile on Tile: Will fix porous tiles to existing ceramic tiles. Please note that existing surfaces should be prepared in accordance with our surface preparation guidelines. For best results abrade the surface to form a key. In such instances drying times will be substantially increased due to the low porosity of the substrate.
- APPLICATION :
- Apply adhesive to the surface by use of a notched trowel. Bed tiles in firmly with a slight twisting action. Clean off excess adhesive from the tile face with a damp cloth and rake excess from the grout lines before it sets. Leave for a minimum of 18 hours before grouting (on impervious or sealed surfaces a longer amount of time will be required). Do not apply more than 1m2 of adhesive before tiling commences, as skinning may occur. If skinning does occur it can affect the bond. Maximum bed thickness is 3mm, achieved by using a 6mm by 6mm notched trowel. Spot bonding is not recommended.
- WALL TILING LOADINGS :
- Wall types vary considerably but all have the same basic need to be
- structurally sound, strong, smooth and level. It is essential that the wall to be tiled has sufficient inherent strength to hold the proposed tile and the adhesive being used. The following chart lists maximum national standard loadings for a variety of wall substrates
- LOADINGS:
- Gypsum plaster 20kg/m2
- Skimmed plasterboard (gypsum) 32kg/m2
- Plywood (exterior grade) 30kg/m2
- Gypsum fibre boards 40kg/m2
- Cement tile backer boards 40kg/m2
- Glass reinforced cement sheets 50kg/m2
- CLEANING:
- Tools should be thoroughly cleaned with water to remove excess material immediately after use.
- STORAGE: This product must be stored in unopened buckets, clear of the ground in dry conditions. Avoid frost. Ideal storage temperatures are between 5 degree C and 25 degree C.
- SHELF LIFE: Under the above storage conditions this product has a shelf life of 6 months.
- HEALTH SAFETY: Please ensure that appropriate PPE is used when preparing, mixing and applying products. Always wash hands before consuming food and make sure that materials are kept safely out of reach of children and animals. Please dispose of packaging and waste appropriately
Specification
- Product Type
- Acrylic Wall Tile Adhesive
- Ideal for
- Ceramic tiles and porcelain or natural stone mosaics
- Unit Size
- 15kg Buckets
- Colours
- Off-white
- Classification
- EN12004 Class D1TE
- Bed Thickness
- 3mm
- Grout After†
- 18 hours This is not the product's set time.
- Coverage
- 1.8kg per m²
- Open Time
- 20 Minutes
- Adjustment Time
- 20 Minutes
- Application Temperatures
- 5 degree C to 25 degree C
- Storage
- Must be stored in unopened buckets
- Shelf Life
- 6 months
Added to Cart
Ultra TileFix ProSuper Grip High Grab Acrylic Wall Tile Adhesive 15Kg
